ROLLS TURN OVER MACHINE
The Rolls Turn Over machine is used for the handling of big rolls or palletized slitted rolls.
In the conversion processes, when the roll to turn comes in vertical position, it is necessary to turn the roll 90° , to be able to put it on the unwinder machine, then the Rolls Turn Over machine is needed to realize this operation.
The same thing is, when the rolls are palletized in a horizontal way, and then you want to put them over a scaffold, then you need to rotate them 90° with the rolls turn over machine.
PALLETIZER
The Palletizing machine serves to pack, with stretchable plastic film, the slitted rolls that come from the slitting- rewinding machine.
ROLLS TURN OVER MACHINE
The all steel “L” type table pivots on bearing housings to realize the 90° spinning movement, by means of a hydraulic system, that drives the piston and moves the table.
PALLETIZER
The Palletizer receives the slitted rolls that come from the slitting- rewinding machine.
Once the slitted rolls are placed on the machine, they are lifted by means of a bench with transverse rollers, in order to join the rolls.
Later the transmission of two rollers is lift, to make spin the slitted rolls in order to be to wrap them with stretchable plastic film.
The rollers have non-skid tape and a system of side arms, which prevent the rolls from separating during the process of palletizing.
Once the slitted rolls are palletized, they are expelled as a unique roll, raising the bench of transverse rollers again.
Usually after the palletizing is done, a Rolls Turn Over machine is used to put the palletized rolls on a vertical position standing on a scaffold.
| To download the latest Acrobat Reader click here. | |||||
| Download PDF file: |  |
(2.3 MB) | |||
